Weak signal when several TVs are connected
Splitting an aerial feed between several rooms can reduce signal levels if the distribution system has not been designed or balanced correctly.
Mick Stoker · 23 years’ industry experience · Covering towns throughout the North East
Industry experience
Speak to Mick himself
Coverage across Northumberland
Hidden cable options
The Paddocks is a new-build development in Morpeth, at Cottingwood, Morpeth, Northumberland, NE61 3GQ, by David Wilson Homes. The location gives residents convenient access to Morpeth and surrounding parts of the North East, while offering the practical benefits of a modern newly built home.
For homeowners moving into The Paddocks, planning TV positions, aerial points and cable routes early can help keep rooms tidy and make the most of the new-build finish. TV & Aerial Installer Newcastle can provide TV wall mounting, aerial installation, television setup and tuning, and neat cable management for homes across Morpeth and the wider area.
We provide and install quality TV wall brackets suited to your television, wall type and the position you want your screen mounted.
The fixings we use will depend on the construction of your wall, including internal stud walls, solid brickwork and other common wall types.
Before any drilling begins, we will discuss the best position for your TV, taking viewing height, room layout and cable access into account so the finished installation looks neat and secure.
If you want a clean, uncluttered finish, we can look at suitable options for hiding the cables connected to your wall-mounted TV.
With 23 years’ experience installing TVs, we have a range of ways to route and conceal cables depending on the construction of the wall and the equipment being connected.
We will discuss the available options with you during the quotation process and recommend a practical solution that keeps the installation tidy while still allowing access where needed.
We install TV aerials and set up reliable Freeview reception for new build properties.
Whether your home has been pre-wired or needs a complete aerial system installed, we can connect and configure everything ready for use.
We can also check signal strength, aerial positioning and existing cabling to make sure your new home has a strong, dependable TV signal from day one.
23 Years' Industry Experience
TV, aerial, wall mounting and AV installation experience across Northumberland.
When you contact TV and Aerial Installer Newcastle, you are dealing directly with Mick Stoker. Mick has 23 years of industry experience and also owns Digital Signs North East, giving him hands-on experience across domestic TV installation and wider professional AV work.
For homeowners, that means straightforward advice, careful installation and one point of contact from enquiry through to the finished job.
Splitting an aerial feed between several rooms can reduce signal levels if the distribution system has not been designed or balanced correctly.
Screen size, seating position, wall construction and bracket type all affect the final result.
Wall mounting often looks unfinished when power, HDMI and aerial cables are left hanging below the screen.
A completed aerial installation may only feed the original rooms, so adding another TV can require an extra point or changes to the distribution setup.
A wall-mounted TV can look unbalanced if there is no suitable space or fixing arrangement for the soundbar below it.
A wall plate can look complete even when the cable behind it has not been connected into a working aerial distribution system.
You can supply your own suitable TV bracket, or we can advise on the type of bracket required for your television and installation. Fixed, tilting and full-motion brackets can all be installed depending on the room and viewing position.
Often, yes. Where the wall construction and cable route allow it, low-voltage TV cables can be concealed for a cleaner finish. If concealed routing is not practical, discreet surface cable management can be used instead.
Yes, although the correct mounting method depends on how the cavity wall has been constructed and what material forms the internal wall surface.
A cavity wall may have blockwork with plaster, dot and dab plasterboard or another internal finish. Identifying the construction allows suitable fixings to be selected so the television is supported by the structural wall rather than just the surface material.
They can be, but full-motion brackets place considerably more leverage on the wall than a fixed bracket because the television can extend away from the mounting surface.
For this reason, secure structural fixing becomes especially important. The wall type, stud positions, television weight and maximum extension of the bracket should all be considered before installation.
Yes. We can install TVs in living rooms, bedrooms, kitchens, home offices and other suitable rooms. Multiple installations can be completed during the same visit where required.
The price depends on the work required, including the television size, bracket type, wall construction, cable management and whether any aerial or additional TV point work is needed. Contact us with details of your new build property and the installation you require for a quotation.
It is worth checking if the TV points do not work, channels are missing or the signal breaks up. New build homes can have internal TV cabling already installed even when the final aerial connection or external aerial setup still needs attention.
Different Freeview services can be transmitted on different frequencies, so a weak or poorly distributed signal may affect some channels more than others. Signal testing can identify whether the issue is reception, cabling, connections or the aerial system.
A fitted TV socket does not necessarily mean that a working aerial has been connected. There may also be an issue with internal cabling, connections, signal strength or the aerial itself. We can test the system and identify where the problem is.
A professional installation is designed to keep wall disturbance to a minimum. The wall construction is assessed first so the correct fixing method can be used, and the aim is always to leave a neat, secure finish around the television and bracket.
There is no single mounting method that works for every new-build property. New homes can contain timber stud walls, metal stud walls, dot and dab plasterboard and solid masonry walls, sometimes within the same property.
The safest approach is to identify the wall construction first and then select the appropriate bracket and fixings. This also gives you the opportunity to plan hidden TV cables, power sockets, aerial connections and equipment positioning before the television is mounted.
Dot and dab walls are particularly common in newer UK homes. They normally consist of plasterboard fixed over blockwork with adhesive rather than timber studs.
The wall may sound hollow in certain areas when tapped, but this alone does not confirm the construction. An installer can check the wall before drilling and choose the correct fixings for the TV bracket.